Liquid silicon fertiliser with stabilised orthosilicic acid (Si(OH)₄)
Gen200 Control supplies silicon in the form of stabilised orthosilicic acid (Si(OH)₄), the form of silicon that plants can take up directly. It also contains potassium, boron and molybdenum. Silicon is built into the cell walls, which helps plants develop stronger stems, leaves and roots and cope better with abiotic stress such as heat, cold and drought. Gen200 Control can be used in all growing media and combined with all fertilisers.
Gen200 Control at a glance
| Silicon | 1.6% SiO₂ w/w, equal to approx. 2.56% Si(OH)₄ (approx. 29 g Si(OH)₄ per litre) |
| Other nutrients | 1.2% K₂O (potassium oxide), 0.1% B (boron), 0.002% Mo (molybdenum) – NPK 0-0-1 |
| Dosage | 15 ml per 100 L of feeding water, with every watering – 1 litre treats approx. 6,700 L of water (about 67 × 100 L) |
| Foliar spray | 1 ml per litre of water, 1–2 times per week |
| Limiting stretch | 3 ml per 10 L in the nutrient reservoir |
| pH / density | 0.8 ± 0.1 / 1.15 g/cm³ |
| Pack sizes | 100 ml, 250 ml, 500 ml, 1 L and 5 L – bulk packaging on request |
Source: technical datasheet and product datasheet Gen200 Control.
Directions for use
Always add Gen200 Control to the feeding water before adding other nutrients. Add 15 ml per 100 litres of feeding water with every watering. As a foliar spray, apply 1 ml per litre of water, 1–2 times per week. To limit vertical stretch, use 3 ml per 10 L in the nutrient reservoir.
- Shake well before each use.
- Keep out of reach of children.
- Only for specified use on label.
- Keep below room temperature.
Product EAN codes:
Gen200 Control (100 ml) EAN: 8719189018011
Gen200 Control (250 ml) EAN: 8719189018028
Gen200 Control (500 ml) EAN: 8719189018035
Gen200 Control (1 L) EAN: 8719189018042
Gen200 Control (5 L) EAN: 8719189018059
Using Gen200 Control to control the height of plants
Silicon uptake by plants strengthens cell walls and improves stiffness in the plants’ epidermis. Because of this, the use of Gen200 Control can be effective in controlling the vertical growth of plants. By feeding the plants increased doses of Gen200 Control, they will get elevated levels of silicon in their system.
The physical effects this silicon has on the cell walls and outer layers of the plant prevent the plant tissue from stretching. The aim is a more compact plant with shorter internodes. Be careful not to increase the dosage too high. To limit vertical stretch, use 3 ml per 10 L in the nutrient reservoir.
Look for signs of overdosing by testing the flexibility of the leaves. If the leaves break upon touching, the silicon levels in the plant are too high.
The ‘silicon paradox’
The ‘silicon paradox’ in agriculture is the contrast between the large quantities of non-absorbable silicon compounds (such as silicon dioxide, SiO2) and the very low concentrations of absorbable silicon molecules (such as silicic acid Si(OH)4). So it is not about the amount of silicon in the soil, but about the amount of bioavailable (mono-) silicic acid, which Gen200 Control contains.
Silicon research and field trials
Silicon is one of the most studied beneficial elements in plant science. Independent studies have looked at, for example, silicon and the water relations of wheat under drought, and the structural role of silicon in the cell walls of rice leaves. Summaries with sources are in our silicon research library. The results of Gen200’s own trials are on the field trials page.
Frequently asked questions
15 ml per 100 L of feeding water (0.15 ml per litre), with every watering. Add it to the water first, before other nutrients. Mixing instructions are on the how to use page.
Yes. Use 1 ml per litre of water, 1–2 times per week. Read more in How to Use Gen200 Control as a Foliar Spray.
At 15 ml per 100 L, 1 litre of Gen200 Control treats approx. 6,700 L of water.
Yes. Gen200 Control can be used in all growing media and combined with all fertilisers, for example with the Rhodos powder nutrients. Always add Gen200 Control to the water first.
Gen200 Control is sold through resellers, in 100 ml, 250 ml, 500 ml, 1 L and 5 L, with bulk packaging on request. Contact us to find a reseller, or become a reseller yourself.
















